In the following list, you will notice that some of the characteristics may seem repetitive in different aspects (productivity, quality, cost or pollution), this is because they benefit in several aspects.

Characteristics Basic Plus Counterflow
The asphalt plant has been designed and fabricated under the most exigent quality standards, which ensures a continuous production with the least breakdowns.
Its compact and mobile size makes it perfect for short term jobs with frequent relocations.
The design and fabrication of the asphalt plant has been perfected to the last detail, with minimum downtime, with the evolution of almost 300 plants manufactured and monitored thru the maintenance we provide.
Simple installation and leveling of the machine, mixing drum, hopper and asphalt tank due to predetermined height and leveling of its chassis and coincidence with each other.
The predetermined leg height guarantees the exact times and permanence of the aggregates and the mixing on each section of the blades increasing production rate.
High capacity bins allow less Payloader dependency.
The dosing and feeding conveyor systems are manufactured under CEMA standards (Conveyor Equipment Manufacturers Association).
Fuel filters, they are necessary for burning alternate fuels, which are generally dirty and can clog the fuel lines.
A filter, pre-heater and fuel pump assembly, is mounted on a hinged and slider base, so that the pump is set low, avoiding purges and starting difficulties.
The drum has extra-reinforced chassis to maintain its alignment as the base of the drum bearing; this minimizes wear on bearings, rolls and rings.
The drum is manufactured with specific blade sections designed for each phase of loading, drying, heating and mixing, this provides maximum production.
  • Loading section: The blades are positioned to form a shield of material around the perimeter of the drum to prevent heat from escaping, whereby the material absorbs all the radiant heat from the flame. They are long enough to prevent the aggregate from falling into the flame, decreasing it; this would result in fuel losses and mixture impregnated with fuel.
  • Drying section: The drum has full sail blades for efficient heat exchange and rapid drying.
  • Heating section: The drum has full sail blades for efficient heat exchange and rapid heating.
  • Asphalt mixing section: The drum has blades of intense incorporation for a fast and homogenous mixing of the asphalt with the aggregates.
  • Fine reincorporation section: Composite sail blades reincorporate the fine materials that have been dragged by the air current into the mixture.
  • Homogenization section: Blade sets for total homogenization of the finished mixture.
  • Ejection section: The drum has a blade set for total ejection of the mixture; they are mixture recycling and segregation proof; then it’s transferred to the drag elevator.
Computerized increment and decrement of production with exact mixture proportions: dosage of aggregates and asphalt.
Computerized exhaust air gate with high precision electromechanical system and auto-correction to achieve maximum production.
Baghouse with 'reverse air' flow type is more reliable than the ‘pulse jet’ type since it does not use any air compressor or electrovalves. The bags are cleaned with the same air flow of the extraction fan using only a rotating nozzle in the upper part.
Greater production than other brands with “same size” models especially in adverse conditions, aggregate humidity and height above sea level.
Impeccable after sale service, we have faced all possible situations in the operation of the asphalt machine and its application in the form of constant improvement of our equipment.